Piscina

Equipamiento vaso

Equipamiento vaso (121)

Items 1-9 of 121

por página
Página:
  1. Sumidero con rejilla ABS cuadrado 210 x 210

    Sumidero con rejilla ABS cuadrado 210 x 210

    Cuerpo y rejilla fabricados en ABS blanco. Salida lateral de 2''. Fijación de la rejilla mediante tornillos. Caudal máximo de 13m3/h.
    > Más información
  2. Pasamuros en inox.

    Pasamuros en inox.

    New range of 300 mm conduits for Ø 2" inlets and "Multiflow", that can be easily be cut to required lengths depending on pool shell thickness. Made in ABS. They all have 2 holes for positioning within the pool shell. Made un S.S AISI-304. Both ends with internal thread of 1 1/2". Earth connection.
    > Más información
  3. Boq. imp. gran caudal pisc hormigón

    Boq. imp. gran caudal pisc hormigón

    Inlet nozzles for large flows. They can be used as suction nozzle also. · PVC body, ABS grille, PA flange and AISI 304 screws. Inlet flow rate 30m3/h · Holes in grilles are not bigger than 8 mm according to EN 13451-1 standard. · Inlet flow rate 30m3/h for a maximum water flow velocity of 4m/s according to EN 13451-1 standard. · Suction flow rate 5m3/h for a maximum water flow velocity of 0.5m/s according to EN 13451-1 standard. · 30º jet inclined at 360 º steerable. · Ø75 or Ø90 pipe connection · We recommend to be installed with the wall conduit code 43590.
    > Más información
  4. Reja de drenaje D.200 en acero inox.

    Reja de drenaje D.200 en acero inox.

    Support ring in white ABS, grille in S.S. 18/8/2 AISI-316. Complete with grille fixing screws. Recommended max. flow: 13 m3/h.
    > Más información
  5. Tapón de invernaje
  6. Sumidero circular d. 270 con rejilla ABS

    Sumidero circular d. 270 con rejilla ABS

    Made totally in white ABS, 1½'' bottom connection and 2'' side connections which can be plugged from the inside for pressure testing. 11/2” bottom connection with plug or for fitting the hydrostatic relief valve (00277) & drainage tube (21581). Grille cover diameter Ø 250 mm. Maximum flow rate: 13 m3/h.
    > Más información
  7. Pasamuros en PVC - Longitud 150 mm.

    Pasamuros en PVC - Longitud 150 mm.

    New range of 150 mm conduits for Ø 2" inlets and "Multiflow", that can be easily be cut to required lengths depending on pool shell thickness. They all have 2 holes for positioning within the pool shell. PVC grey colour.
    > Más información
  8. Boquilla impuls Multiflow enroscar

    Boquilla impuls Multiflow enroscar

    MULTIFLOW SYSTEM The eyeball has been marked with a series of "knock-outs" at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation. Recommended max flow 4 m/sec., complies with UNE 13451-1: Ø 14 mm = >2.2 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h 2" external thread, Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15658-15659. Grille slots are < 8 mm. Complies with UNE 13451-1.
    > Más información
  9. Reja de drenaje D.200 en ABS

    Reja de drenaje D.200 en ABS

    Support ring and grille in white ABS. Complete with grille fixing screws.
    > Más información

astralpool cepex astralpool